Allied Bolt - PART# 203

• Used for making lightweight attachments (under 40 lbs.) such as terminals and back-plates of wall phones to drywall.
• No pre-drilling is required.
• The screw size is #6-32 x 1-3/4".
• Wall thickness ranges from 1/8" to 5/8".
• Fiber washer prevents anchor from turning while tightening screw.
• Once anchor is set, screw may be removed as often as necessary without effecting anchor.
• Hollow Wall Drive Anchors are comprised of an expansion sleeve and a machine screw.
• The sleeve is formed from steel with a flanged collar at one end and a threaded section at the working end.
• Flanged collar has two prongs which grip surface of base material to prevent anchor from spinning during installation.
• As screw is tightened, the screw pulls against threaded section causing legs to expand and draw up tightly against the inside wall.
• Hollow Wall Drive Anchors have a sharp point on the end of the machine screw on which a tapered plastic bushing is mounted for penetrating sheetrock.
• Manufactured from AISI 1008 Steel.
• Zinc-plated to meet ASTM specification B633.

Standard Packaging Information